Do you know the difference between SWL/WLL/MRC and when they should be used?
A hydraulic lift table is an ergonomic device utilized to raise, lower or tilt workloads such as pallets.
It can be an extremely difficult task to operate a crane with the precision needed to ensure loads are picked up and dropped off without causing any damage to the environment or people around it. Which is why having a strong signaler and crane operator relationship is key in crane safety.
When working with overhead cranes, dropped loads are one of the most common safety hazards. Improper operator training, side pulling with the crane, poor rigging technique, using an incorrect lifting device and hoist overloading, are the most common causes for dropped loads.
When using an overhead crane for material handling applications, having a preventative maintenance program in place is IMPERATIVE. This maintenance program should be centered on crane manufacturers recommendations, and based on an effective and thorough safety and inspection program that is conducted on a regular basis.
Accidents, property damage and fatalities occur every year due to improper use of cranes and equipment failure. Identifying hazards and adhering to simple inspection can safety guidelines reduce the probability of these unfortunate occurrences.
It is critically important that lifting equipment is in proper working order before placing it in service, for the safety both employees and a facility. When it comes to safety, any part of equipment inspection cannot afford to be overlooked. The equipment inspection and maintenance process includes the testing of equipment before it is used in operations. We will be going in depth about the importance of load testing overhead hoists and cranes throughout this blog post.
Increased production, faster operating speeds, better controls, or automation and those are just the tip of the ice-burg of what you can gain when you decide to modernize or upgrade your crane.
Single top running, single under running, double top running and double under running, these four distinct different categories are what sets girder overhead cranes apart from each other.
This article will focus on each one of these distinct categories separately so you can gain a complete understanding of just what is a girder crane, and what one might suit you best.
Often times one of the best ways to transport product throughout a warehouse facility is through lifting it up and moving it overhead. By handing products and materials overhead you can help to increase productivity, enhance worker safety and increase the amount of available floor space.
If you don’t wish to install heavy and expensive lifting equipment, but you have large heavy materials to move you may believe that you are stuck in a pickle, fortunately for you though you do have options.
What are jib cranes, and what are their uses? A jib crane is like the supporting actor to an overhead crane, they don’t get all of the attention, but without them the show could not go on.
Liftsafe Group of Companies 