Cart Movers are designed to easily move heavy loads throughout your facility. These material handling units are perfect for ensuring worker safety and increasing productivity when pushing or pulling heavy equipment. They are convenient and portable, and do not have electric cords or pneumatic hoses to trip over.
Amendments called the Stronger, Fairer Ontario Act, 2017 (Bill 177), have been made to the Ontario Occupational Health and Safety Act (OHSA) and went into effect on December 14, 2017.
Amendments called the Stronger, Fairer Ontario Act, 2017 (Bill 177), have been made to the Ontario Occupational Health and Safety Act (OHSA) and went into effect on December 14, 2017. These amendments are the largest changes that have been implemented into OHSA in over 15 years. Some of the changes include tripling corporate OHSA penalties and quadrupling individual OHSA penalties.
Do you know the difference between SWL/WLL/MRC and when they should be used?
One of the most common denominators for organizational performance issues is behavior, especially when it comes to safety. It is because of this that we often see repeated poor safety performance with no sustainable change in behavior due to the fact that the focus is on the action and not the behavior that lead to the action.
Though you may take all of the proper preventative measures to decrease the chances of an injury occurring, they still happen and it is important to be prepared for them – that way you can ensure that they are handled correctly.
Keeping your pallet racking safe is vitally important. In addition to your annual rack safety inspection by a trained inspector, you should carry out regular internal inspections at set intervals (weekly, bi-weekly, monthly etc). But what should you check for? This blog post will go into detail about how to keep your pallet racking safe!
Ready or Not, Here Come the WHMIS Inspectors.
It can be an extremely difficult task to operate a crane with the precision needed to ensure loads are picked up and dropped off without causing any damage to the environment or people around it. Which is why having a strong signaler and crane operator relationship is key in crane safety.
When using an overhead crane for material handling applications, having a preventative maintenance program in place is IMPERATIVE. This maintenance program should be centered on crane manufacturers recommendations, and based on an effective and thorough safety and inspection program that is conducted on a regular basis.
In Ontario, ALL workers who use fall protection on a construction project MUST complete an approved working at heights program by October 1, 2017. This includes workers who met the fall protection training requirements of the Construction Projects Regulation prior to April 1, 2015.
In Ontario, ALL workers who use fall protection on a construction project MUST complete an approved working at heights program by October 1,2017. Training must be conducted when workers are exposed to a fall hazard as defined by Section 26.2 of O.Reg. 213/91 – Construction Projects. This includes workers who met the fall protection training requirements of the Construction Projects Regulation before April 1, 2015.
As of April 1, 2015, employers must ensure that certain workers complete a working at the heights training program that has been approved by the Chief Prevention Officer (CPO) and delivered by a CPO approved training provider before they can work at heights. For a list of approved training providers that have been approved by the Chief Prevention Officer as meeting the working at heights training program and provider, standards click HERE.
The training requirement is for workers on construction projects who use any of the following methods of fall protection: travel restraint systems, fall restricting systems, fall arrest systems, safety nets and work belts or safety belts.
Workers who have already received training that meets section 26.2 of the Construction Regulation (213/91) had two years to complete a working a heights training program. This two-year transition period began on April 1, 2015, and the deadline of October 1,2017 is quickly approaching.
This training requirement is in the Occupational Health and Safety Awareness and Training Regulation and is in addition to training requirements under the Construction Regulation. To review the Construction projects, click HERE.
What Does a Working at Heights Training Program Entail?
- The Program Standard requires that working at heights course includes two modules: basic theory and practice.
- Basic Theory Module must be at least 3 hours in duration.
- Practical Module must be at least 3.5 hours in duration.
- Written test – 75% passing grade
- Hands-on test – a satisfactory demonstration
- Training will be valid for 3 years.
- After completing both modules, the employer must supplement the training program with additional information, instruction, and training on workplace-specific policies, procedures, hazards, and equipment related to working at heights.
How Does This Affect YOU?
Do your employees all have fall adequate fall protection training?
Does your employer enforce having fall protection training?
Does the company working on your construction project enforce having fall protection training?
Data for this blog post was found here: